General Club Stuff > New Members - Say Hello

Now then

(1/4) > >>

HIGH TOWER:
 ;) Hi have an old Disco 200 that is well past its best and before I send it to the scrap thought I would check you guys out . My main hobby is trikes




Our Latest Toy . 3.9 stroker Rover Jag IRS . F1 racing tyres on the rear .

Anyway back to the disco . was working well then the central locking packed up changed the battery in the key fob , yes i know you only get 30 sec. still no go phoned L/R the say ecu needs reprogram bring it in  :roll: rot in the chassi so it aint worth the hassel , scrap man will give me £100 unless I can get any other ideas  ;)

live north Linc's

karlo:
This any help?

Programming a single button disco key fob


It may take several attempts and the timing must be correct for this to work

1)Starting conditions: ignition off, doors unlocked, bonnet switch depressed.

2)Steps 3 to 9 MUST be carried out within 8 seconds.

3)Switch ignition ON.

4)Switch ignition OFF.

5)Lock doors.

6)Unlock doors.

7)Release bonnet switch.

8)Switch ignition ON.

9)Switch ignition OFF.

If alarm is correctly accessed, the horn will sound and LED will light. It is now possible to program two handsets of correct frequency to vehicle alarm ECU.

This must be carried out within two minutes.

10)Press and hold down button on first handset until dash LED flashes.

11)Repeat instruction for second handset.

12)The LED will extinguish if both handsets have been initialized correctly


As far as I know twin button fobs must be programmed by computer.

lee celtic:
Nice trike dude ...

I build seats for a local Bike shop and have done loads trikes and thats a nice one  :cool:

Welcome to the club.... :D

parry:
Hello and welcome to the club

Lincs niva:
Hi mate welcome to mud club...

Cheers Gav

Navigation

[0] Message Index

[#] Next page