Vehicle & Technical > Discovery
Washer bottle
(1/1)
Banjo:
Does the washer bottle on a 200tdi sit on studs or nut and bolt :(, I need to remove it to clean it as there appears to be something growing in it, that keeps blocking the jets.
solihull-mick:
Hi should be held in place with 3 bolts, all going down bank into the inner wing,
Banjo:
Cheers Mick, if they are rusted to bad plan B is the pressure washer in the bottle, if that fails plan C is remove the jet, extend the pipe and cable tie it to the wiper arm :D.
Navigation
[0] Message Index
Go to full version