Vehicle & Technical > Discovery

Alternator Belt Tensioner Bearing - is this the right one

(1/1)

JDB:
On the site that cannot be named is item number 320279985853 the right bearing to replace the one in the centre of the auto adjusting alternator drive belt?
Spec is :
6203 2RS Ball Bearing - New
BEARING MEASURES:
17mm(I.D)x40mm(O.D)x12mm(WIDTH)

Just at the price they seemed a bargain as others seem to be selling the same thing at £5 each?

andyb:

--- Quote from: JDB on November 10, 2008, 21:05:56 ---6203 2RS
--- End quote ---

Yes thats the one. That is the SKF part number :)

meader:
is the pully squeeling the only reason i ask is bought a new bearing and fitted it but it turned out to be the pully was slightly of set .if this is the case then put a penny coin or washer behind the pully at a nine oclock position and it will  sort out the squeel.if this is not the problem just forget my post

JDB:

--- Quote from: meader on November 11, 2008, 17:15:45 ---is the pully squeeling the only reason i ask is bought a new bearing and fitted it but it turned out to be the pully was slightly of set .if this is the case then put a penny coin or washer behind the pully at a nine oclock position and it will  sort out the squeel.if this is not the problem just forget my post

--- End quote ---

This is on the auto tensioner and I am not sure I can get a coin behind it, knew that was the cure for the manually tensioned ones - but thanks.

AndyB - thanks for confirming.

Navigation

[0] Message Index