Vehicle & Technical > Discovery
Brake line extension?
(1/1)
Mr Alford:
i need to extend my brake lines, i have two lines per brake per side compared to some who just have the one
i am intreagued as to what tubing to use or weather the braided lines extended 40mm will be enough?
i am going for a new suspension setup on the front, bearmach springs, i already have -2" turrents and im going to add dislocation cones
i have noticed bull frog has done this, what had been used and is it any good?
Range Rover Blues:
You need to get the brake flexis made up, not a DIY job. That said you can get Goodridge hoses (others are available) made to pretty much any length your heart desires.
I got mine form Matt Savage.
hairyasswelder:
--- Quote from: Range Rover Blues on November 09, 2008, 16:41:22 ---You need to get the brake flexis made up, not a DIY job. That said you can get Goodridge hoses (others are available) made to pretty much any length your heart desires.
I got mine form Matt Savage.
--- End quote ---
Mine are +4" Goodrich braided and came as a set from Paddocks. They were around £50 for 5, (4 front and 1 rear)
As said above you can get them made to any size, but I took the 'off the shelf' option.
lee celtic:
I got mine from Llama 4x4 nice blue ones and I did away with the steel bits that are fitted to the caliper as they were very rusty. :D
I think they were £11 each any length up to 1 mtr. with swivels at the top so they don't kink when you tighten the up.
Good service too :clap:
Navigation
[0] Message Index
Go to full version