Vehicle & Technical > Discovery
Will they fit ok ????
crazymac:
Mate runs a new standard suspension system on the Disco with 235.85R16's. The only mod was the camel cut!
He takes it to extreme articulation with no problems.
loony landy:
--- Quote from: crazymac on November 04, 2008, 21:49:08 ---Mate runs a new standard suspension system on the Disco with 235.85R16's. The only mod was the camel cut!
He takes it to extreme articulation with no problems.
--- End quote ---
No mods and standard suspension ??? So i could get them fitted before i do the lift on sat then and they would be fine ???
Disco-andy:
i also have a mate who dose runs them on standard sus but he cut the first lip off the arches all the way round. they are grizzly claws mind.
Disco-Ron:
I have 235 85's on mine, with a 2 inch lift, cranked radius arms, etc, and zero offset 7inch rims, i have had to do a big camel cut, AND also similar on the front of both rear arches..... i suspect this is due to the wheel offset, so spacers might make things worse...!!!
I have also had issues on the front, if you still have the standard front bumper, you may find it needs trimming, again, i have QT front arms, and have also had to do a camel style cut on the rear of each front arch......
so, quite a lot of messing about really......
loony landy:
Mine are bfg mud terrains, so can i run them without to many mods :huh:
Was going to get them put on and run them till the weekend when i do the suspension lift, would they be ok till then
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version