Vehicle & Technical > Discovery

help with parts transfer box seal and handbrake

<< < (2/2)

Les Henson:
You generally only need to replace the outer seal (not sure what they mean about an inner one to be honest)


Les.

stageonesimmo:
Do they still have the daft rubber backed felt thing at the base of the splines in the output flange like on series kit?  Its that long since mine was in bits I cant remember.......

Tom. If your's is a manual, for that age you'll be wanting the 'vertical' fitting shoes and NOT the 'horizontal' fitting ones.  Thats the only 2 types I can recall there being a choice of?.............

Les Henson:
Yes, there's a felt washer under the output flange washer to prevent oil seeping up the splines.
Output shaft oil seal is P/No FRC7043
There are two washers behind the flange nut, but EPC doesn't specify which one is the felt washer.
P/No's are 571468 and FRC2464. I think the latter is the felt seal.


Les.

Navigation

[0] Message Index

[*] Previous page