Vehicle & Technical > Defender

turbo boost

<< < (2/3) > >>

CookieMonster:

--- Quote from: Tommo on September 20, 2008, 15:37:16 ---Honestly just T it into the actuator pipe with a T piece from car washer jets, its not going to matter on a land rover.



--- End quote ---

i agree, thats where mine is run too, bit of an arse to get to but the easiest spot to tap into, mine works fine with roughly between 1.1 and 1.2 bar of pressure.

jimthelandyman:
cheers, looking to turn the boost up to about 17 psi can't wait to see what it will go like. Currently making a straight through exhaust aswell thinking of bringing it out just before the N/S/R wheel but i can't bring mysel to cutting a hole in the side just in case i get it wrong  :D

CookieMonster:
i ran a straight through but it was too loud for my liking so made it agin with a very small box in it, it just took the edge off it, was so pleased, its loud but not daft, lol. And it also comes out infront of the n/s/r wheel through the body, sometimes you've just got to do it, dont wory about cutting it, its pretty simple to line up. Heres mine...............

jimthelandyman:
Yeh was thinking of putting a small silencer on might use the one off my td back box, ive taken the silencers off for now just need to get some pipe to make the side exit part, know what you mean about  taking the edge off it as when its revving hard it sounds a bit harsh. Going to order some paint on friday so i can paint my multicoloured landy.

extreme90:
or just weld the wastegate up like me  :lol:
i adjusted the arm...wanted more than a std ( wel modded ) wastegate would let me so i welded it up on the manifold

Navigation

[0] Message Index

[#] Next page

[*] Previous page