Vehicle & Technical > Discovery

Disco in dispair (part 2)

(1/4) > >>

Mud-muncher1:
Hi all, can anyone shed any light what the problem can be with overheating again,

It's had the head skimmed, new H gasket, new rad,  water pump, top an bottom pipes, another new thermostat, new timing and cam belt about 2 months ago but now has started playing up again, could it be the H gasket again as i got another water pump put on changed the P gasket took out the thermostat and flushed the rad out, if anyone can give more advise it would be very much appreciated as it will stop me from using my groundworkers trowel on it (sledge hammer),


Thx Jav.

stageonesimmo:
Was the head pressure tested when it was skimmed?

bilge rat:
looking at the pic on your avatar have you flushed the outside of the rad , fins arent clogged with silt or mud are they . just  a thought ...

simdeb:
Have you replaced the rad mine looked ok till you ran the hose through it and hardly anything came through replaced the rad and hoses and all was well . or is the inter cooler ok had one on range rover diesel the turbo was ok but the inter cooler had had it and it was causing the engine to over work it had got clogged with oil inside so looked ok from the outside , hope this might help

simon

Lincs niva:
Im quite sure he had a brand new rad fitted...

Cheers Gav

Navigation

[0] Message Index

[#] Next page