Vehicle & Technical > Discovery

rear work light - recomendations

<< < (2/3) > >>

bambamjj:
Yes please Dr.Ed. Photo's to if you can  :D

ben_haynes:

--- Quote from: Dr.Ed on September 05, 2008, 16:40:11 ---I have one on the left gutter (CB aerial gutter mount) that works well - have managed to link it to the brake lights and on an independant switch - I'll see if i can dig out the circuit diagram if anyone wants it.

Ed.

--- End quote ---

dont mean to sound to thick, but why have you linked a Work light/ reversing light to the Brake lights??? :huh:

eugene:
that what i was thinking every time he brakes blinds whoevers behind him. ive got a work light on left hand side that has seperate switch to turn on and of and also comes on when in reverse :D

Dr.Ed:
meant attached to reversing light not brake!

circuit diagram attached, A is a switch near the drivers position to select whether the work light comes on with the reversing light, B is a switch just inside the back door to turn the light on as needed, -ve connection was to the earth point above the rear light cluster, +ve to the 12S trailer electrics behind the right light cluster and the "reverse light" was connected to the feed to the left hand cluster reversing bulb. photo of light location also attached - excuse the sunk land rover.

hope this helps,

Jeff J J:
I have a work light on my Disco i will try and post some phots tomorrow. I have it wired up to a switch on the dash separate from the reverse lights. Its monted on a CB mount. Jeff

Navigation

[0] Message Index

[#] Next page

[*] Previous page