Vehicle & Technical > Discovery

Bad Vibrations

<< < (3/4) > >>

karlo:
Ashcrofts do the spacer to fit the 200 flange on to the 300 About £7 delivered

karlo:
spacer part no

539745----£4.00
Carriage---£2.00
VAT-------£1.05
______________
Total------£7.05
______________

stageonesimmo:
Oh, so I need a spacer to fit the 200 diff flange to the 300 diff?   I thought it was just a straight fit - or is this a spacer to leave the 300 flange in place and fit a 200 prop?

Disco_Stu:
Bingo. The doughnut acts as spacer amongst other things.

One quick point however. LR fitted doughnuts for a reason, I reckon the reason was because 200tdi's kept busting diffs. You'll find doughnutted drivelines break less often than UJ'd ones. True, the doughnut, even original (not pattern part) only lasts 12 months but they're still cheaper and easier to replace than diffs.

This by no means advice against changing, I run a UJ and 200 prop myself on my 300, just be aware of the possible downsides.

Stu.

Jeff J J:
Cheers Wizard i will give your man Vince a shout see what his got out there could be a good Friend to have. The thinning with mates like that is you go there to look at a switch and come back with a winch  :) .

Good to talk again. Jeff

Navigation

[0] Message Index

[#] Next page

[*] Previous page