Vehicle & Technical > Series Land Rovers

Landr Rover series 3 109 hi-cap

<< < (2/2)

Range Rover Blues:
If it's the normal Rover axles rather than Sallisbury then any locker will fit, the 10 spline diffs are all intrerchangeable but be careful that you keep at least one oil filler hole.

As for the point I reckon you can swap the axles if you keep the original suspension and steering gear, unless of coourse you mean that you need to keep leaf springs, which is a fair point.

ash240970:
Yes need to keep the leaf springs and axle casings with the serial no's on as they are what keeps my Landy tax exempt!

Range Rover Blues:
IIRC you need only keep the chassi and one axle, or steering gear to get enough points.  The issue comes for those who have gone over to coils as this neccesitates a chassis modification.

Plus the RRC axles are too wide.

Do you know if it's possible to bolt early RRC swivels onto a series axle :-k

Rich_P:

--- Quote from: Range Rover Blues on August 15, 2008, 19:15:27 ---Do you know if it's possible to bolt early RRC swivels onto a series axle :-k

--- End quote ---
I hear that the bolt pattern doesn't match.

ash240970:
i need both axles as steering is S3

Navigation

[0] Message Index

[*] Previous page

Go to full version