Vehicle & Technical > Defender

looking for a company that sells prebent axhaust angles

(1/2) > >>

flash42:
looking for a company that provides pre bents angles to fabricate my own straight through exhaust for my defender.
also has anyone got experience with flexible metal exhaust tubing for the same job.

cheers

flash

Mark_Solesbury:
if you got a 90, get a late 300tdi back section.

Its a straight though pipe thats pre bent over the axle etc.

Then all you need is to make a mid section, which is a straight section about 70cm long.

flash42:
im looking to have a side exit exhaust, coming out behind the passenger door.

V8MoneyPit:
How about http://www.jetex.co.uk/.

I've bought bends, straights and silencers from them on a couple of occasions.

The 'bits' section is here:
http://www.jetex.co.uk/website/custom_parts.php

andyb:
Can always chop up a few exhausts off scrappers. Should be cheap as chips :)

Navigation

[0] Message Index

[#] Next page