Vehicle & Technical > Toyota

Swing away spare wheel carrier.

<< < (2/2)

Range Rover Ron:
Hello Paul,

reading through the info available you will have to strengthen the rear panel to fit one to a UK spec LC.

cheers,

Ron.

Range Rover Ron:
Hello Paul,

I've made contact with the guys selling the carriers on Ebay,
they say that you can get a plate for the rear wheel mount from Toyota.

I've not checked this out but it's worth a look.

Cheers,

Ron.

MONSTERTRUCKMAN:
if you can do some fab work its not t difficult to make one up. i made mine fix to the exo cage

Range Rover Ron:
Hello Paul,

The lads at WC 4x4 have fitted an internal wheel carrier inside their TLC's.
If you contact Paul I'm sure he'd help out with dimensions etc.
He's has a thick bar bolted onto the rear wheel arch and then conected to the roof,
an arm then protrudes off the bar and a plate has two wheel studs on it,
the wheel then bolts to the plate and sits upright inside the truck.
it looks quite good and is out of the way of thieving scum bags.

Cheers for now...

paul_humphreys:
Yes Ron I have seen that type, mine is like that now but I want it out side of the 80.

Paul

Navigation

[0] Message Index

[*] Previous page