Vehicle & Technical > Discovery

bucket seat fitting my basic guide

(1/1)

mentalmoshio sophs V8i:
id used the ebay ones for 129 quid delivered

first job unbolt the 4 seat star bolts by sliding the seat right foward then back.

next measure the seat base left.

i made a 4 mm alloy plate for the top and used the orginal mounts to hold it in

then make the runner out for the new seats center and middle of the plate is a must.

drill the holes out .

then use m8 25mm bolts with locking thread to hold them in .

may be a good idea to test fit seat not bolted up first.

roughly 3 hours each one.

will add more pic in a few day.

gamekeeperjames:
are these fixed permanantly or can they be adjusted, i.e distance from steering wheel etc

mentalmoshio sophs V8i:
they move the the orginal one as for steering wheel im gonna to be changing my one to ripspeed one . id say 6ft 3 would  still drive it easily with a greater holding in the seat 4 sure

Navigation

[0] Message Index