Fun, Friendly and Free
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
Forum back online. Please post!
Home
Forum
Battle
Search
Login
Register
Mud-club
»
Vehicle & Technical
»
Discovery
»
My guide to fitting seats
Print
Pages: [
1
]
Go Down
Author
Topic: My guide to fitting seats (Read 25774 times)
0 Members and 2 Guests are viewing this topic.
clover
Posts: 550
Attack: 100
Defense: 100
Attack Member
Karma: +0/-0
Clover
Referrals: 0
My guide to fitting seats
«
on:
June 29, 2008, 21:20:25 »
Here is the guide I knocked up on how to fit 300 series 1 leather electric seats into a 200 series 1 shell...
http://www.thewillbys.com/seats.html
Hope its of use to somebody.
«
Last Edit: June 29, 2008, 21:39:24 by Thrasher
»
Logged
1996 Discovery 300TDi Affectionately known as Clover.
Cooper Discover STT 33/12.50/R15, a 2" body lift off chassis. H/D springs with 50mm platform spacers on the rear. Nothing on the front as they foul the shocks :-) 11" travel rough country shocks and mountings with dislocating spring cones, adjusted wheel arches, safari snorkel. H/D rear bumper, demountable drop plate,. H/D steering guard, QT diff guards.
tree sliders, Split charge running twin Optima's, spotlight bar with 4 whoppers on it, H/D winch bumper, 12,000lbs winch, A bar with 2 50w mini spotlights, brownchurch full length roof rack. 2 work lights.CB,
Fine English engineering modified to work!
mentalmoshio sophs V8i
Guest
Re: my guide to fitting seats
«
Reply #1 on:
June 29, 2008, 21:26:16 »
i do like the look of the ES fronts seat much better than the standard ones just wish they did them in black seats for the rear.
Logged
clover
Posts: 550
Attack: 100
Defense: 100
Attack Member
Karma: +0/-0
Clover
Referrals: 0
Re: my guide to fitting seats
«
Reply #2 on:
June 29, 2008, 21:39:00 »
Don't think I've ever seen a set of ES seats in black (not full leather anyway). I've seen half leather ones on some of the later models but don't recall if they were electric.
«
Last Edit: June 29, 2008, 21:44:17 by discopinky
»
Logged
1996 Discovery 300TDi Affectionately known as Clover.
Cooper Discover STT 33/12.50/R15, a 2" body lift off chassis. H/D springs with 50mm platform spacers on the rear. Nothing on the front as they foul the shocks :-) 11" travel rough country shocks and mountings with dislocating spring cones, adjusted wheel arches, safari snorkel. H/D rear bumper, demountable drop plate,. H/D steering guard, QT diff guards.
tree sliders, Split charge running twin Optima's, spotlight bar with 4 whoppers on it, H/D winch bumper, 12,000lbs winch, A bar with 2 50w mini spotlights, brownchurch full length roof rack. 2 work lights.CB,
Fine English engineering modified to work!
flipper
Posts: 36
Attack: 100
Defense: 100
Attack Member
Karma: +0/-0
complete man-whore
Referrals: 0
Re: My guide to fitting seats
«
Reply #3 on:
July 02, 2008, 09:44:44 »
them seats look good but on another note how did you get your stero to sit flush ?? :-k
Logged
clover
Posts: 550
Attack: 100
Defense: 100
Attack Member
Karma: +0/-0
Clover
Referrals: 0
Re: My guide to fitting seats
«
Reply #4 on:
July 02, 2008, 20:39:16 »
ROTL! Should I do a how to with pictures??? :dance:
Darn nuisance isn't it! I was forever catching my knuckles on the radio in my Rangie when I went into low ratio because I coule not get it in any further.
Pinky has got an adapter to convert Land Rover plug to standard rover ISO as the cable from the stereo is ISO (that the PO did a very pi5s poor wiring job on and I can't for the lifr of me work out why or what he was trying to achieve. Some chav no doubt!) So basically I made sure none of the wiring blocks were behind it. Trouble is they now stick out the side like a sore thumb. One of these days I'll get an unmolested Panasonic ISO lead to tidy it up.
Logged
1996 Discovery 300TDi Affectionately known as Clover.
Cooper Discover STT 33/12.50/R15, a 2" body lift off chassis. H/D springs with 50mm platform spacers on the rear. Nothing on the front as they foul the shocks :-) 11" travel rough country shocks and mountings with dislocating spring cones, adjusted wheel arches, safari snorkel. H/D rear bumper, demountable drop plate,. H/D steering guard, QT diff guards.
tree sliders, Split charge running twin Optima's, spotlight bar with 4 whoppers on it, H/D winch bumper, 12,000lbs winch, A bar with 2 50w mini spotlights, brownchurch full length roof rack. 2 work lights.CB,
Fine English engineering modified to work!
Ja1983
Posts: 1082
Attack: 100
Defense: 100
Attack Member
Karma: +0/-0
This week I have mostly been fixing....
Referrals: 0
Re: My guide to fitting seats
«
Reply #5 on:
July 13, 2008, 03:04:00 »
i recently fitted some half leather recaro buckets from a rover coupe into mine.... very comfy, height adjustment on drivers... so even stumpy SWMBO can drive comfortably!
..took about 4 hrs to figure out the final plan tho, but easy enough once i`d done that!
Logged
It has been said that, given enough time, a million monkeys bashing at a million typewriters would eventually produce the complete works of Shakespeare. Thanks to the Saxo forums, we now know this to be wrong
No oil leek = No oil left!
clover
Posts: 550
Attack: 100
Defense: 100
Attack Member
Karma: +0/-0
Clover
Referrals: 0
Re: My guide to fitting seats
«
Reply #6 on:
July 15, 2008, 20:32:27 »
I bet yours were harder to fit than mine! Personally I like the ES seats very much as it makes my Disco very much like driving a RRC which were IMHO one of the most comfortable of all the Range Rovers.
Logged
1996 Discovery 300TDi Affectionately known as Clover.
Cooper Discover STT 33/12.50/R15, a 2" body lift off chassis. H/D springs with 50mm platform spacers on the rear. Nothing on the front as they foul the shocks :-) 11" travel rough country shocks and mountings with dislocating spring cones, adjusted wheel arches, safari snorkel. H/D rear bumper, demountable drop plate,. H/D steering guard, QT diff guards.
tree sliders, Split charge running twin Optima's, spotlight bar with 4 whoppers on it, H/D winch bumper, 12,000lbs winch, A bar with 2 50w mini spotlights, brownchurch full length roof rack. 2 work lights.CB,
Fine English engineering modified to work!
DCR
Posts: 14
Attack: 100
Defense: 100
Attack Member
Karma: +0/-0
Referrals: 0
Re: My guide to fitting seats
«
Reply #7 on:
July 15, 2008, 23:09:07 »
Hi my seats had worn out completely I had a pair Saab 9000s fitted having had a Saab for a few years I knew how comfortable they were.And they came for nothing. All the best.
Logged
clover
Posts: 550
Attack: 100
Defense: 100
Attack Member
Karma: +0/-0
Clover
Referrals: 0
Re: My guide to fitting seats
«
Reply #8 on:
July 18, 2008, 20:18:59 »
SAAB seats are popular mod with the VeeDub guys as the seat bases are very flat and this makes the rails easy to fit to a flat surface. SAAB 900 seats are orthopedic as well and I have to say the GM 900 I had was one of the most comfortable cars to be in I have had as far as seats go.
Logged
1996 Discovery 300TDi Affectionately known as Clover.
Cooper Discover STT 33/12.50/R15, a 2" body lift off chassis. H/D springs with 50mm platform spacers on the rear. Nothing on the front as they foul the shocks :-) 11" travel rough country shocks and mountings with dislocating spring cones, adjusted wheel arches, safari snorkel. H/D rear bumper, demountable drop plate,. H/D steering guard, QT diff guards.
tree sliders, Split charge running twin Optima's, spotlight bar with 4 whoppers on it, H/D winch bumper, 12,000lbs winch, A bar with 2 50w mini spotlights, brownchurch full length roof rack. 2 work lights.CB,
Fine English engineering modified to work!
auf_wiedersehen_pet
Posts: 1179
Attack: 100
Defense: 100
Attack Member
Karma: +0/-0
Referrals: 0
Re: My guide to fitting seats
«
Reply #9 on:
November 16, 2008, 07:52:48 »
Great guide. :lol:
I have a 300 series. I'm just about to buy a full set of electric seats with switches and loom. Do I simply run a 12v to to switches?
When I did it on my RRC, I gutted the switch box, replaced it with 4 window switches and loads of wire!
Logged
Rob Steele
1995
Land Rover Discovery 300 TDi
- Everyday Car (Ex Jap)
2007
Toyota Avensis 2.2 T-180
- Sensible Car (Ex TSB Bank)
clover
Posts: 550
Attack: 100
Defense: 100
Attack Member
Karma: +0/-0
Clover
Referrals: 0
Re: My guide to fitting seats
«
Reply #10 on:
November 27, 2008, 18:47:24 »
I should think so providing the switches are not toasted and that you have the center console or some such thing for mounting them
Logged
1996 Discovery 300TDi Affectionately known as Clover.
Cooper Discover STT 33/12.50/R15, a 2" body lift off chassis. H/D springs with 50mm platform spacers on the rear. Nothing on the front as they foul the shocks :-) 11" travel rough country shocks and mountings with dislocating spring cones, adjusted wheel arches, safari snorkel. H/D rear bumper, demountable drop plate,. H/D steering guard, QT diff guards.
tree sliders, Split charge running twin Optima's, spotlight bar with 4 whoppers on it, H/D winch bumper, 12,000lbs winch, A bar with 2 50w mini spotlights, brownchurch full length roof rack. 2 work lights.CB,
Fine English engineering modified to work!
Ja1983
Posts: 1082
Attack: 100
Defense: 100
Attack Member
Karma: +0/-0
This week I have mostly been fixing....
Referrals: 0
Re: My guide to fitting seats
«
Reply #11 on:
December 18, 2008, 17:46:32 »
Logged
It has been said that, given enough time, a million monkeys bashing at a million typewriters would eventually produce the complete works of Shakespeare. Thanks to the Saxo forums, we now know this to be wrong
No oil leek = No oil left!
carracarra13
Posts: 581
Attack: 100
Defense: 100
Attack Member
Karma: +0/-0
just add mud lots of mud
Referrals: 0
Re: My guide to fitting seats
«
Reply #12 on:
January 02, 2009, 23:37:45 »
Im in the process of fitting manual ones from a td300 into a 200 my self (was going to use rrc seats as I have two Realy good ones non electric but they sit high (and Im 6ft 6 ) so vision might be a problem still might have a play will post how I get on further, but thoes seats look good m8 thanks for the info helping me lots :D
Logged
v8 3.9 se discovery
pland mod lpg or hydrogen kit ?
allterains
twin battery, and water proofing engin and electrics
imverta
clover
Posts: 550
Attack: 100
Defense: 100
Attack Member
Karma: +0/-0
Clover
Referrals: 0
Re: My guide to fitting seats
«
Reply #13 on:
February 04, 2009, 15:48:34 »
I may have the panels I used up for sale... possibly with seats ...
Logged
1996 Discovery 300TDi Affectionately known as Clover.
Cooper Discover STT 33/12.50/R15, a 2" body lift off chassis. H/D springs with 50mm platform spacers on the rear. Nothing on the front as they foul the shocks :-) 11" travel rough country shocks and mountings with dislocating spring cones, adjusted wheel arches, safari snorkel. H/D rear bumper, demountable drop plate,. H/D steering guard, QT diff guards.
tree sliders, Split charge running twin Optima's, spotlight bar with 4 whoppers on it, H/D winch bumper, 12,000lbs winch, A bar with 2 50w mini spotlights, brownchurch full length roof rack. 2 work lights.CB,
Fine English engineering modified to work!
Ralph Hardwick
Posts: 88
Attack: 100
Defense: 100
Attack Member
Karma: +0/-0
Referrals: 0
Re: My guide to fitting seats
«
Reply #14 on:
December 18, 2009, 23:42:13 »
The link in the first post didn't seem to work for me.
Anyhow here is how I fitted RR seats in my disco:
http://www.overland-rovers.com/ralphs-pages/vehicle-modifications/7-fitting-range-rover-seats-in-a-discovery.html
I hope it's of interest.
Logged
1995 300Tdi Discovery
Vehicle mods and expedition countdown blog
www.overland-rovers.com
Norfolk & Suffolk 4X4 Response
www.4x4response.net
Print
Pages: [
1
]
Go Up
Mud-club
»
Vehicle & Technical
»
Discovery
»
My guide to fitting seats
SimplePortal 2.3.5 © 2008-2012, SimplePortal