Vehicle & Technical > Series Land Rovers

series rebuild/mods

<< < (2/3) > >>

Rich_P:
It all depends on the splines on the diffs.  I don't know if the early Disco 1 diffs are 10 or 24 spline.  You'll probably need to check the number of splines on your halfshafts too.  Most Series motors are 10-spline, but some later ones had more splines on the shafts.

Jim-Willy:
My 2a has a early disco diff in the rear.....  10 spline.

LeanneNCharlie:
the diffs i have out of the disco are 10 splines so i guess i'll have no problems there then.

on to the next question. is it possible to mount the series steering box on to a 90 bulkhead?

charlie.

Jim-Willy:
90 bulkheads have been modded to fit series landies before......

LeanneNCharlie:
are the mods easily done? for example, is it just a case of lining it all up and drilling a few holes or is it more a case of the panel where it will mount needs a few chops and changes?

will i be able to use 90 clutch and brake servo's?

cheers, charlie.

Navigation

[0] Message Index

[#] Next page

[*] Previous page