Vehicle & Technical > Discovery

uuuh ooooh lol

<< < (2/2)

blackbob:
i have two diffs and the shaft,s from my 1988 rangie think they will fit your disco depends where you are in uk
 :lol:

LeanneNCharlie:
i blew the rear diff on my 300 not so long ago. found out that a service exchange diff was £250 so it now runs with 10 spline diff, half shafts and a trusty 200 prop. no more doughnut troubles. only snag in fitting was that 10 spline half shafts are 3/8's for the bolts and 24 spline are 10mm. a stainless steel drill bit is not tough enough to drill out the holes so i used a die grinder and a diamond cut hole file. apart from this all fits fine, no odd noises and its been given some hammer in the last few weeks.

hope this helps.

insa-disco:
cheers for the replies people, managed to get a diff today for it and few other odds and sods i.e polly bushes etc etc all for the sum of 75 quid, some have said was bit pricey but compared to some ebay oprices thought it was good,
and black bob im up near santa pod  so  would of been a trek and half lol, thanks for the offer though

Navigation

[0] Message Index

[*] Previous page