Vehicle & Technical > Discovery

DISCO FUEL PROBLEM ONGOING

(1/2) > >>

DCR:
After having a new timing belt and and all the bits fitted.I am having a problem when I start up.The car seems to have a flat spot.IE will not respond to the accelerator.It ticks over at 1100 RPM for about a minute then the revs drop to 800 and away we go.Sometimes  a great deal of smoke is emitted but not always.I have had it up at Paul At kinsons on his analyser it cleared a few faults but he could not fathom this one out. has any body got any ideas.Incidentaly  Paul cleaned loads of connections.Reckons it may be a bent valve .The motor runs well apart from the initial hesitation and is quite nippy. :( :(

biggerlandy:
who did the belt

eugene:
i had that as well i changed all filters cleaned sediment filter out it was full of nasty stuff re checked teppets gave it a realy hard load of revs solved my problem

DCR:
The belt and bits were fitted at a local workshop.

DCR:
I have asked about having the sediment bowl cleaned and several garges have declined the work. Is it major work or can I crawl underneath and do it my self.

Navigation

[0] Message Index

[#] Next page