Vehicle & Technical > Range Rover
well it was running ,but now not
spud the king:
OK so what have i done wrong :oops:
its a 3.9 v8 in a 110 was working but it had a nasty miss fire so put new pugs and leads ,still miss firing, so went to local garage and they tried to advance the timing but they said that the diorama on the side was at folt so got home and tuck the bit off [not as bad has i thought ] but the little pin got stuck on the magnit thing[ the call it they hot wire system i think]
so had to take the hole unit out , got the bits and went to put it back together all was ok [i think]
but now it wont start ,got spark from coil and got no spark at plugs , so am i right and think its the dizzy and cap or am i missing something that i did wrong as i cant work it out :oops: :oops: :oops:
v8nut21:
have you had the cap off cheek that the center pin is still in the cap might just be that
spud the king:
is that the little plastick bit thats under the dizzy thats got a lip on it
v8nut21:
yep its a litile black pin in the center of the cap on the in side
spud the king:
yep its all there inplace as it came apart
Navigation
[0] Message Index
[#] Next page
Go to full version