Pages: [1]   Go Down

AuthorTopic: water proofing the distributor V8  (Read 7262 times)

0 Members and 1 Guest are viewing this topic.

Offline beast5680

  • Regional Rep
  • *
  • Posts: 2938
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • hailsham east sussex
  • Referrals: 0
water proofing the distributor V8
« on: February 14, 2005, 19:32:06 »
Has any one got any suggestions/pics of how to stop the dizzy getting splashed, i think i need it after she died the weekend when it got covered in water, happily the trusty can of wd40 seemed to solve it quite quickly and we were back in the mud playing again after about 10 mins
Logged
Neal

let him that hath understanding reckon the number of the beast

He, who laughs last, laughs best. He who laughs at Chuck Norris dies.

Offline Jake

  • Regional Rep
  • *
  • Posts: 5474
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • <insert witty comment here>
    • South Molton, Devon. UK
  • Referrals: 0
water proofing the distributor V8
« Reply #1 on: February 14, 2005, 20:26:51 »
There are some special 9 fingered rubber gloves avalible for the distributor and 3 fingered glove for the coil. Cant remember where though? My biggest problem is the spark leads connecting to the spark plugs. Remedy - longer rubber caps on the spark plug ends! Avalible from all leading manafactor's (cheese) :)
Logged
Jake

Owner - Land Rover Discovery 2
Driver - Land Rover Defender 100" Trayback

Offline Paul

  • Administrator
  • *****
  • Posts: 4935
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • Hinckley, Leicestershire
  • Referrals: 0
water proofing the distributor V8
« Reply #2 on: February 14, 2005, 20:47:13 »
I use an old 1 gallon plastic container with the top cut off
and placed over the dizzy, Also done the same to the coil.

http://members.mud-club.com/profiles/paul/gallery/V8%20Snorkel/1/635163-1107207386.JPG

HTH
Logged
Paul Wright



Offline beast5680

  • Regional Rep
  • *
  • Posts: 2938
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • hailsham east sussex
  • Referrals: 0
water proofing the distributor V8
« Reply #3 on: February 14, 2005, 21:01:01 »
do you find thats ok paul i presume it just stops the water splashing on the dizzy and the coil and thats enough to keep them dry etc
Logged
Neal

let him that hath understanding reckon the number of the beast

He, who laughs last, laughs best. He who laughs at Chuck Norris dies.

Offline Paul

  • Administrator
  • *****
  • Posts: 4935
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • Hinckley, Leicestershire
  • Referrals: 0
water proofing the distributor V8
« Reply #4 on: February 14, 2005, 21:05:03 »
Yep,

Well so far I've been lucky, It's drop a cylinder or two but
it's never stopped running... Better than it was before..
Logged
Paul Wright



Offline beast5680

  • Regional Rep
  • *
  • Posts: 2938
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • hailsham east sussex
  • Referrals: 0
water proofing the distributor V8
« Reply #5 on: February 14, 2005, 21:31:23 »
i drowned mine the weekend when entering large muddy pond a bit too fast, it ran on about 5 for a while ,enough for me to get to dry land :D and then stopped
Logged
Neal

let him that hath understanding reckon the number of the beast

He, who laughs last, laughs best. He who laughs at Chuck Norris dies.

Offline Colin 009

  • Posts: 2303
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • High Wycombe
  • Referrals: 0
water proofing the distributor V8
« Reply #6 on: February 14, 2005, 23:09:52 »
Logged
Cheers.
Colin,
Shiny Blue Crew 009
                   "Everbody Has to be Somewhere"


 

gords

  • Guest
water proofing the distributor V8
« Reply #7 on: February 15, 2005, 00:37:52 »
I saw some of those strange looking things on a stall at the 4x4 show - it took a few looks to realise what they were :lol:
Logged

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
water proofing the distributor V8
« Reply #8 on: February 15, 2005, 01:57:26 »
Quote from: "Colin 009"
Hi guys this might be what your looking for,

http://www.tufftoys4x4.co.uk/asp/product.asp?recorprod=13&product=544&cat=97&ph=cat&keywords=&recor=1&SearchFor=&PT_ID=1


That's the one, I've got one and it's only just enough to cover the cap, mind you there still a large gap where the clips go over so if it got really dunked then there's no saving it.  But arcing across the top between the leads is the biggest problem anyway.

Top Tip, for the coil I salvaged 2 off Ford clip on fittings for the coil LT leads and fead these through the rubber boot, then connected the mutlitude of wires to the other ends of these 'flying leads'  The Ford clip-on coil plugs give an extra layer of waterproofing and sheild a possible arcing path for the coil (ever seen a coil arcing to the LT terminals?)

For those of you with more initiative than spare cash, a tuppaware container, tube of silicone and an old milk carton gets you nearly as good!





(put the coil in the tuppaware, silicone the joints.......)
Logged
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

Offline Xtremeteam

  • Regional Rep
  • *
  • Posts: 6476
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Its just the way i roll
    • lampeter, west wales
  • Referrals: 0
water proofing the distributor V8
« Reply #9 on: February 15, 2005, 14:54:43 »
on my 90 ive got the coil in an icecream tub with a snap lid & i removed each lead & cleaned them with brake cleaner & then soaked in wd40,removed & cleaned the cap & put a wee spray o wd40 inside & a small bead of silicon grease round the base o the cap before putting it back on,refitted the leads in the correct order & bobs ur brothers father,theres some pics in this post from ther day at drumclog,never missed a beat once
http://forums.mud-club.com/viewtopic.php?t=4485
Logged
Mike
I can Drive.. You can criticize..
I too can criticize like you.. but can you Drive like me??

Offline RRC

  • Posts: 145
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
water proofing the distributor V8
« Reply #10 on: February 15, 2005, 19:02:26 »
The other weekend i went through some rather deep water and mud. In the morning, i smeared Vasoline on the distributer. It worked a treat all day. Well impressed.
Logged
Used to own a Range Rover Vogue SE 3.9 1990

Offline beast5680

  • Regional Rep
  • *
  • Posts: 2938
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • hailsham east sussex
  • Referrals: 0
water proofing the distributor V8
« Reply #11 on: February 15, 2005, 19:08:59 »
Quote from: "RRC"
The other weekend i went through some rather deep water and mud. In the morning, i smeared Vasoline on the distributer. It worked a treat all day. Well impressed.


Hmm taking the vaseline and going out for the day :D what would the wife say?, i had thought about that as well might try it, nearly finished scoffing the ice cream as well so i can have the pot, ooh i feel sick now :(
Logged
Neal

let him that hath understanding reckon the number of the beast

He, who laughs last, laughs best. He who laughs at Chuck Norris dies.

Offline Paul

  • Administrator
  • *****
  • Posts: 4935
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • Hinckley, Leicestershire
  • Referrals: 0
water proofing the distributor V8
« Reply #12 on: February 15, 2005, 20:34:51 »
Quote from: "beast5680"
nearly finished scoffing the ice cream as well so i can have the pot, ooh i feel sick now :(


 :lol:  :lol:  :lol:
Logged
Paul Wright



Offline beast5680

  • Regional Rep
  • *
  • Posts: 2938
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • hailsham east sussex
  • Referrals: 0
water proofing the distributor V8
« Reply #13 on: February 27, 2005, 17:25:09 »
after all the tips :D  i found an old 5 litre can cut it to fit and fitted it round the dizzy as per pauls piccies, works a treat no problems today when out, have also fitted an old plastic water bottle round the coil with the leads coming out the neck for a bit of splash protection
Logged
Neal

let him that hath understanding reckon the number of the beast

He, who laughs last, laughs best. He who laughs at Chuck Norris dies.

Offline Paul

  • Administrator
  • *****
  • Posts: 4935
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • Hinckley, Leicestershire
  • Referrals: 0
water proofing the distributor V8
« Reply #14 on: February 27, 2005, 17:37:44 »
Who needs expensive waterproofing kits. :wink:

Works well for me too Neal. :D
Logged
Paul Wright



Pages: [1]   Go Up
 





SimplePortal 2.3.5 © 2008-2012, SimplePortal