Vehicle & Technical > Range Rover

Suspension Turret Retaining ring

<< < (4/4)

fatbaz:
When fitting a +2 lift to my RRC kit with +2 pro comp shocks the standard length goodridge hoses I had fitted were on the point of snapping on articulation, that's with out -2 turrets. 

Had to get +3 hoses, courtesy of Regency Hydraulics, MK.  On the front pairs, to stop them flapping about in the breeze and to stop the rubbing, I wound on a section of the plastic coiled protectors, taken from the original rubber hoses, around each pair of braided hoses. 

You need to be carefull when positioning/routing the braided hoses so as they don't contact the tyres when under full lock etc.

Stuart   :)

Navigation

[0] Message Index

[*] Previous page