Vehicle & Technical > Discovery
Cracked head? K seal?
peasey:
dont worry mate its confusing first time around!!!now im only going on what the haynes manual says about your engine now it says to remove the turbo charger but it should in my mind come out in one lump with the exhaust manifold unless you have issues with space around it.mate to be honest im clutching at straws a little here and one of the other guys might be able to help you,its tricky to deciphere the haynes manaul when you havent got the lump in front of you,and a heavey head from 2 many beers but it sounds like your doing well mate.just a quick thought if you are still struggling with this bolt/stud soak it in wd40 or similar and go and have a cold one yourself :lol:
Les Henson:
How to remove a 300TDi cylinder head.
[ul]http://forums.lr4x4.com/index.php?showtopic=8179[/url]
Les.
BeJay:
Hi Les,
.........re-did the link for you as it didn't seem to work from yours, here it is
................. cheers, Jack
Les Henson:
Thanks Jack - my crop spoiling agin :(
Les.
marky:
Excellent. I just got up after a night shift and thought I'd have a quick look on here with my up of tea and saw the replies to my post. Thank you very much Les and Jack, very helpful, much better than the haynes manual (refer to section....!) All but one of the studs on the exhaust manifold came out with the nuts and the exhaust still feels fairly firm. So when I've finished my tea I'll go and give it a wiggle and a bit of gentle persuasion and hopefully the head should be free. Thanks again chaps
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version