Vehicle & Technical > Defender

full re wiring on a defender 90

<< < (2/2)

kizz81:
hello, please keep us informed with progress and take a couple of pictures please im thinking of doing my landy, the fuse board definatly needs doing and all the wires behind it are the same colour :shock:

VWP might have something you need, there good on tools and such

trickydicky:
if you tie string to the rear chassy loom before you pull it out you can get it back through but take photos of absolutely everything.i didn't and i forgot were they all went  and check all the earths on all the lights i had lights going on and off all over the place and that was all it was

V8MoneyPit:

--- Quote from: trickydicky on April 20, 2008, 21:45:56 ---if you tie string to the rear chassy loom before you pull it out you can get it back through but take photos of absolutely everything.i didn't and i forgot were they all went  and check all the earths on all the lights i had lights going on and off all over the place and that was all it was

--- End quote ---

Mine had to go through a new chassis. If you have to do this, find yourself a friendly electrician with fibreglass rods to pull a piece of string through  :D

trickydicky:
i put mine through with a Peace of 30 mm plastic trim

Navigation

[0] Message Index

[*] Previous page