Topic: 200tdi HEAD PROBLEM (Read 759 times)

ferret · « **on:** April 08, 2008, 17:42:23 »

Ive removed the head and stripped it but three of the glow plugs when removed have left the tips in the head, so how can i remove them?

TDi90 · « **Reply #1 on:** April 08, 2008, 17:52:25 »

do you mean the tip at the bottom? as in the opposite end to the thread where the nut goes on...
Rob

ferret · « **Reply #2 on:** April 08, 2008, 18:58:12 »

do you mean the tip at the bottom? as in the opposite end to the thread where the nut goes on...
Rob

Yes i removed the plugs but 3 of the tips stayed in the head. Ive tried gently tapping them but they have'nt moved.

TDi90 · « **Reply #3 on:** April 08, 2008, 19:07:51 »

get a pair of thin pliers on them if you can...

ferret · « **Reply #4 on:** April 08, 2008, 19:17:25 »

so its better to pull them out than tap them back through.

ferret · « **Reply #5 on:** April 08, 2008, 20:15:34 »

Their out ....freeze spray and a tap with a hammer.

Range Rover Blues · « **Reply #6 on:** April 09, 2008, 01:48:06 »

Cool, whenever possible it's best to make use of the fact that Aluminium expands twice as fast as steel when heated ;)

News: