Vehicle & Technical > Discovery
Need to replace the Clutch in my Disco Whats involved ?
stevepage3:
Hi
My clutch has started to make a lot of noise when in neutral with foot off the pedal, when you press the pedal the noise changes to a squealing noise.
I think it is time to change the clutch, is it possible to do myself and what sort of costs are we talking about.
Steve
meader:
transfer box and gear box out but its bloody heavy best thing to do is seperate the two as it will be easyier to remove that way i did mine that way led on my back on the drive
chris9119:
Easy enough job, once you've done a dozen or so...., ask me how I know.
I wouldn't split the units as you could damage the seal on the transfer box when mating the boxes.
Would recommend that you replace all parts when you do it, full clutch, new fork (welded up), fork pivot bracket, etc.
Good quality parts will cost circa £160.00.
Would recommend using one of these: http://www.machinemart.co.uk/shop/product/details/cml2-hydraulic-motorcycle-lift/path/vehicle-lifts Makes the job very easy...., wish I new about these before....
Garage would probably charge in the region of £300.00/£400.00 for the labour....
The West Midlands regional members complete these type of tasks as part of their maintenance weekends......
bodgeitjo:
there is the posibility that it is the main shaft in the gearbox that is makin the noise, mine was the same for a few months then went bang. look in haynes manual they tell symptoms in trouble shooting. hope im wrong on this one as mines doing the same agian. and ive only had this one 5 months.
stevepage3:
How long would you think it would take to change it over.
Navigation
[0] Message Index
[#] Next page
Go to full version