Vehicle & Technical > Discovery

Clear Rear Light Cluster

(1/5) > >>

Jeff J J:
Hi every one dose any one no if you can get clear rear light clusters for 300Tdi I have clear indicators front and rear but think to finish the job off clear rear lights would do the job. Plus when i have the old light out what sort of mod do i need to do to make the the main light work as in when the lights are on i have red lights on the bumper and on the rear light cluster. That should get some minds going. Thanks Jeff

ben_haynes:
to get both the bumper and cluster lights working i have fitted a set of 200 series lights,

yes you can get clear lenses, but dont know where from though

Jeff J J:
Cheers Ben if i manage to find a clear light cluster kit i will try and get the 200. Was it a case off taking the old 300 out and putting the new 200 in its place or is there any wireing involved. Jeff

ben_haynes:
yes just take the 300 one out and pop the 200 one in,

you may find that you need to run a wire for the side lights but from memory i dont think you do (i will ask my boss if he had to wire his up) when he fitted his

Range Rover Blues:
Fitting 200 light units you will gain both a tail light and an indicator, you can wire up both from the loom that runs behind the light unit as the wires you want run in the main loom.  I seem to remember something about swapping one of the wiring strips over from one to the other too, but I've only done it once so memory is a bit hazy and it was dark/in a hurry so no photos :roll:

The hardest bit I found was getting the waterproof jacket back in place.

Navigation

[0] Message Index

[#] Next page