Vehicle & Technical > Discovery

Brake vac pump

<< < (2/3) > >>

90Mike:
Hmm been  :-k could i just have an air leak from the servo or pump/pipes thats causing my problem
i can pull up to a stand still after a run no problem with full sevo power but if i move off again and stop straight away like in traffic the pedal is hard  :shock: but give it a good rev and i then have power again  :?

solihull-mick:
Can you hear an air leak in side the car? could be a weak pump, as the end plate on 300 vac pumps are rivited on and tend to work loose, check your pipe work for leaks,

90Mike:
I cant hear anything inside  :-$ i will have a closer look at the pipes tomorrow.

--- Quote ---could be a weak pump
--- End quote ---
that was what i was thinking
i was very kindly  ;) sent this link http://www.the4wdzone.com/vacuumpumpfix.htm  i think it got to be worth a go :)
cheers mike

solihull-mick:
I use nice stainless allen key bolts, tap out the vac pump body with an M6 tap, job done, looks very neat,

90Mike:
Sounds like a lot of work just to get it covered in mud  :D

Navigation

[0] Message Index

[#] Next page

[*] Previous page