Vehicle & Technical > Range Rover

WINDSCREEN WIPERS HAVE GONE NUTS!!!!

<< < (2/2)

Range Rover Blues:
Easy :shock:

Bonnet off, wiper arms off, decker panel off and there is is laughing at you.

ChrisV8:

--- Quote from: Range Rover Blues on February 27, 2008, 03:07:48 ---Easy :shock:

Bonnet off, wiper arms off, decker panel off and there is is laughing at you.

--- End quote ---

HA HA easy ??? Its a PITA getting the two little bolts out that hold the decker panel to the wing top at each end, hidden down towards the bulkhead and then a myriad of screws holding it to the body edge. Also careful releasing the bonnet off the brackets as they can spring up quite nicely ! You really need two to take the bonnet off without damage.

have fun !

Range Rover Blues:
Sorry, I was being a little sarcy ;)

Range Rover Ron:
I had the bonnet & scuttle board off a while ago.
I should have checked the motor then,
but like always,
nothing was wrong with it when I could get at it!
Sounds like a job for the summer!

Them small bolts that hold the panel onto the wings......
Now I've got the inner wing guards off due to the wheel arch chop,I can get at them a bit easier,
When I had the bolts off I replaced them with plastic number plate nuts & bolts to stop the [!Expletive Deleted!] rusting up.

Cheers, Ron.

GREENI:
ON A 90 IT'S THE CONNECTOR BETWEEN THE WIRING LOOM AND THE MOTOR IT SELF...
IT'S CALLED THE SELF PARK SWITCH OR SOMETHING LIKE THAT...ONLY CHEAP...IT WON'T BE YOUR MOTOR !

Navigation

[0] Message Index

[*] Previous page

Go to full version