Vehicle & Technical > Discovery
suspention question
Range Rover Blues:
--- Quote from: clbarclay on February 19, 2008, 20:40:48 ---RRB
The later RRC with ARBs did go back to a single peice of rubber for the metalastic radius arm bushes, thats why I fitted some. It saved the effort of changing radius arms and axle to be able to fit early RRC or 90 narrower bushes. Having said that I'm sure with some carful grinding and some washers you can fit narrow bushes to wide arms and axle.
--- End quote ---
I had a nagging feeling they had done. I havn't checked them all but every one of ours I've swapped had the stiffer bushes in there, of course the LSE needs them :-.
I'm going to take the polybushes out of the rad arms on Blue and fit a set of QT arms with Defender bushes in them, so I'll be needing washer in there too I guess. Now it's not the only RRC I have to drive it doesn't need to handle quite so well and I want better articulation too, blue is the off-roader now, the TDi (when it comes back) is the daily drive and the LSE is for scaring myself/towing the 'van :D
Navigation
[0] Message Index
[*] Previous page
Go to full version