Vehicle & Technical > Defender

discovery axles

(1/7) > >>

trickydicky:
hi i have just brought a second hand descovery axle for my defenderonly to discover that it has 2 pipes cuming out of each caliper has anbody got a clue how i can make this fitt as the calipers and pads and disks look brand new?

redhand:
I take it you mean 2 brake pipes. if so either run a 2nd brake line from one calliper to the other. or remove the brake pipe all together and fit a blanking plug a bleed nipple with the hole welded shut.  will probably do it

extreme90:
most people use a t piece similar as that fitted to rear axle
why fit a butter axle of a disco to the 90 though  :-.

redhand:

--- Quote from: extreme90 on February 17, 2008, 21:31:57 ---most people use a t piece similar as that fitted to rear axle
why fit a butter axle of a disco to the 90 though  :-.

--- End quote ---

I'm confused post 1990 90's and disco's share the same axles it's only the the 110's that have a salisbury axle.

Guardian.:
yes just 't' them do not chop and weld 1, that would have catastrophic concequences (bet thats spelt wrong), the brakes should have both pots on the caliper working not just 1 side.

Navigation

[0] Message Index

[#] Next page