Vehicle & Technical > Discovery

Will 200 tdi off road bits fit 300tdi

<< < (2/3) > >>

python:
whats wrong with the 200? why dont you just keep it. sounds a good motor

wheels244:
The back end on my 200 requires attention, I've done the sills and inner wings last year. If i got it through the mot this year it would be another body part needing welding next year, I'm getting a bit bored of the fabrication and welding. Time is at a premium at the moment.

Dr Evil:
I'd keep the 200, a better engine IMHO, plus when the weldings done it'll all be good. You may have to do it all again to the 300 ?

SteveGoodz:
I think everything should fit but the 200Tdi axles don't have the mounting points for the anti-roll bars so you'll have to remove those from the 300 .. or weld on some brackets  :lol:

Ja1983:
buy a 300, and a towing dolly......


i`m a bit puzzled by your argument that you dont have time to sort the 200, but your talking about swapping over axles, gearboxes etc... i would have thought it would be far easier to spend a weekend with the welder and have a motor you know is 100%

thus leaving more time for the important things in life...

Navigation

[0] Message Index

[#] Next page

[*] Previous page