Vehicle & Technical > Defender

temp senders?

(1/3) > >>

josh90:
anyone know were to get a temp sender and gauge for a disco 200 tdi engine but in a 90? cant find them anywhere cheers

Guardian.:
GET A TIMS ONE MATE THEY ARE ACCURATE AND REASONABLY CHEAP , OFF THE TOP OF ME HEAD ABOUT 40 SQUID WITH THE CORRECT SENDER FOR ENGINE.
IF YOU GET STUCK LET US KNOW AND I CAN SORT THEM OUT FOR YOU.

diggerdog36:
Or, steve Parker sells the correct one, count the threads on yours, tell him what you've done (disco in 90) and he'll send you a re-machined TD sender!!!
About £6 plus p+p

BK:
Got one,they dont work!!!! as guardian says put a new gauge in,I had this problem the only way round it is to put a new gauge in,i bet your gauge is reading too high?on the white bit just b4 the red? if you go on vehicle wiring products site they do a "durite" gauge that looks good in the defender and then buy BOTH sets of adapters for the sender unit (not sure of the thread) and jobs a good un.Or a cheap way is to buy a gauge,use the original sender into the housing,cut the top off and drill a hole into it to match the size of the "durite sender"and just solder the new sender into the old sender.A lot of pratting about i know but it works perfect,my mates just done it

diggerdog36:
What temperature does a 200tdi run at though???

Navigation

[0] Message Index

[#] Next page