Vehicle & Technical > Defender

clutch

(1/2) > >>

antk:
hi all i have a problem with my 90 2.5 turbo diesel,

the clutch is not working properly feels like there is nothing under the pedal and it does not go into gear

any ideas??

thanks Ant

electricbluebadger:
Is there fluid in the resevoir???

Have you bled the system??

Cheers Steve

Devon-Rover:
Could be hydraulic failure of the Mc or the slave. Does anything change should you pump the pedal repeatedly? Is there clutch fluid in the reservoir? if not has it all run out of the bell housing drain hole? Thus indicating that the seal has gone.

Other wise it could be that the pushrod has punched it's way through the clutch fork. And rectifying that is a gearbox out job.

Artwigwa:
The same happened to me  :'( , it turned out that the clutch release bearing had collapsed  :roll:

Lee_D:
get you hand around the pedal and see if any fluid has run down it. If so theit's the master cylinder. Also possible that the hose could be ballooning ... to check get under and get an assistant to press the pedal.

All other suggestions are sound.

Navigation

[0] Message Index

[#] Next page