Vehicle & Technical > Discovery

little update on my 200 commercial

(1/2) > >>

winx:
As I had a decent break over Christmas decided to spend some time on the disco.

Along with a service I fitted an egt display from Si at X-Eng, I was going to wait for a few months before buying one but having wasted over half an hour of his time just before christmas chatting away about all things land rover I thought I better get one bought now!

I work in the same building as our prototype department so managed to get some thermocouples from them, the first is quite long so is bent back and the tip is right up at the beginning of the manifold.  Decided this was the best place to mount it so took off the manifold and made an egr plate like the 300's have:


As I had quite a few I decided to put 2 more in, one in the airbox and one in the inlet manifold so I can see how much the turbo is heating the air.  I need to sort some sort of switch to go between the 3 thermocouples, anyone got any ideas?


I had also noticed that the airbox to turbo hose was well past it's best so again raided the prototype boys for some silicone hose, damned if I was going to pay £80 plus vat for a land rover one!


Also bolted on my ebay aircon compressor ready for on board air. 

Next job is to try and source the bottom pulley and tensioner, but again don't really want to pay landrover prices for them!!

Then onto mounting the EGT monitor in the dash.  I have already got a pc screen and a few other bits and bobs so the only place left was between the vents, luckily it fits perfectly!


And finally decided to remake the centre console with some drinks holders, fed up of bottles flying around the cab!

Range Rover Blues:
Given the (lack of )strength of the thermocouple signal I'd suggest a gold plated switch like you'd find in audio equipment or Hi-Fi.

Disco_Stu:
Wow @ your console. Will it do warp 8?

Stu  :lol:

Guardian.:
LOOKS WELL GROOVY

Evilgoat:
Given you have some knowledge of electronics.

DG411DY will do it.

You want an analog -=>RS232 box to hook it up to your PC, can give you 8 inputs ;)

Navigation

[0] Message Index

[#] Next page