Vehicle & Technical > Discovery
Cambelt Woes, need help
Evilgoat:
Well she's mostly stripped down, how many points for these? :
Gant get the crank pully bolt out though, both me and rob TD90 hanging off of it and the impact wrench and it just wont shift :(
stuntman:
Can you safely get a butane torch in there (one of the little ones from B&Q), if so what about lots heat on the nut, I used one of these little blow torches for the first time at the weekend and it was a very handy little tool.
Oh and 10 points for the rods!
Skibum346:
You could try some of the freeze spray you can get. Can't remember what the can I have is called or where I got it... but it's kinda the reverse of the blowtorch approach... very quickly cools things down to well below freezing... You might even want to try using heat then cold...?
electricbluebadger:
put a socket on the pully nut, wedge the breaker bar against the chassis and flick the starter, never had it fail to loosen yet...
Cheers Steve
auf_wiedersehen_pet:
You poor devil.
You're not having much luck recently.
:'( :'( :'( :'(
Navigation
[0] Message Index
[#] Next page
Go to full version