Vehicle & Technical > Defender

NSF Camber

(1/2) > >>

Mark_Solesbury:
My 90's NSF has some odd looking camber about it.

Its further in at the top than the bottom, which makes it look odd...

Any ideas?

Workshop manual does not mention camber at all.....

biggerlandy:
could be to much swivel play or top or bottom pin worn out

crazymac:
Tracking and steering bars, you've bent something :wink:

Mark_Solesbury:
Everything seems to be straight, and there is enough under body protection for the steering components...

What would cause the camber to be out then?

Tracking would just make it toe badly....

crazymac:
When I bent my track bar the top of the passenger wheel was leaning in at the top and pointing to the side even though the drivers wheel was pointing straight :?

By fitting sumo bars and taking the time to set things properly its all sorted 8)

Navigation

[0] Message Index

[#] Next page