Vehicle & Technical > Discovery

help me!

(1/4) > >>

jaysastud:
ok,i was drivivg along normally and all of a sudden there was no power and my dico cut out!its a 3.5 v8 any ideas?i have fuel and the leads are all on,i have the rotor arm with the brass pin in the top i was told these are a dodgy batch and they sumtimes short out?could that be my problem?the rotor arm is only about 6 days old! i need help!!!

Disco Sev:
Have you checked that you are getting a spark at the plug leads?  If you are NOT getting a spark then try just the coil lead, if you get a spark here then the rotor arm could be a likely suspect :D

andygod:
Have you tried the fusible links, they are located on the offside inner wing inside an insulated sleeve. The links corrode and all power to the engine etc is lost. I think from memory that you should have about 6 links covering various equipment. You probably have just one or two that have corroded away.

jaysastud:
i dont appear to have any spark at all!any ideas?

jaysastud:
all sorted it was the cheap halfords tat rotor arm that let me down!beware of halfords junk!thanx for the help thogh people!

Navigation

[0] Message Index

[#] Next page