Vehicle & Technical > Defender

Help!Hazards dont work and MOT is tommorrow :(

<< < (3/3)

extreme90:
yep id say the little contacts have burnt, altho, when the do, they wipe the plastic rocker out with them aswel
ive only ever been able to fix one before  :roll:
dan

3laner:
indicators work ok untill i turn the hazards switch on, then nothing happens (no indicators or hazards!). i assume this is because when the hazards are on they override the indicators.I will have a look inside the switch.annoying i only noticed it now i dont usually use hazards!

extreme90:
its deffo the switch then  8)

V8MoneyPit:

--- Quote from: "3laner" ---indicators work ok untill i turn the hazards switch on, then nothing happens (no indicators or hazards!). i assume this is because when the hazards are on they override the indicators.I will have a look inside the switch.annoying i only noticed it now i dont usually use hazards!
--- End quote ---


Yes. The hazard switch isolates the indicator circuit before starting the hazards.

3laner:
well took a gamble and bought a new switch.the only place that could get me one on the day was the main stealer who charged me £50!!It was the switch and the hazards are now working.
BUT the tester did not even try them!!!
back in for a partial retest tomoro after i have replaced the track rod (bent) and ball joint on steering which is moving up a little when steering moved side to side.

Many thanks for all your help guys

Navigation

[0] Message Index

[*] Previous page