Vehicle & Technical > Range Rover

double springs

(1/2) > >>

way2deep:
can anyone shed any light on this .my mate has just bought a rangie with a perkins 3 9 fitted and it has two springs per side on front axle,any ideas if this is normal and if so what springs would they have used?thanks robbie.

Bush Tucker Man:
No. As the Perkins is a big heavy lump, they're using them to help give it a reasonable ride-height & keep it off the bump-stops

Range Rover Blues:
The only ones I'm aware of are ex-camel trophy cars, the springs were made by Carmicheal.

famousdave:
ON THE BUILDING OF THE 6X4 PICK UP FOR A TACR IT HAD DOUBLE SPRINGS ON BOTH REAR AXLES. BUT I DOUBT IF THEY WOULD FIT THE FRONTS AS THERE WRER EXTRA SLOT IN PLATES TOP AND BOTTOM TO LOCATE THEM AND ON THE FRONT THE SHOCK WOULD NOT BE ABLE TO COME THROUGH
THANKS FAMOUS

muddyweb:
Depends on the set up... are there 2 springs and a damper, or is it a coil-over damper (with the spring mounted on it)  ?

A Range Rover I just broke had coil-overs on the front so it looked like there were 2 sets...

Navigation

[0] Message Index

[#] Next page