Vehicle & Technical > Discovery

breaking clonk

<< < (5/6) > >>

smith335:
Thanks for the info Darren, at least i now know i have the right discs fitted.

many thanks

Range Rover Blues:
IIRC the front pads shouldn't be able to rub on the hub as the retaining pin goes through the pad, unlike the back :roll:

chaosego:
my pads give a little clonk every now and then when puling up .as long as they are stopping me not too worried  :wink:

davidlandy:
I had a clonk when braking - turned out to be the front raduis arm bushes worn at the axle end.

a way to check it is to brake quite hard until you come to a complete stop, then release the brake pedal and you should feel the diff nose drop back down with a dull thud/clonk.

hope this helps

The Welder:
Mine is a 1995, 300 Disco, just had new brake discs and pads fitted by Landranger, all solid discs, as were the old ones they took off.

Navigation

[0] Message Index

[#] Next page

[*] Previous page