Vehicle & Technical > Discovery
Implications of no back box on a 300Tdi??
bilge rat:
bent mine a while ago and just just got a peice to slip over where the bracket is, just a straight through. like you say not much difference in noise, bit more clearance and easier than a side exit but it has crossed me mind. alan.....
crazymac:
My back box has also fallen off my 200, and as I had my MOT yesterday I figured I needed to do something!! So i cut a straight piece of exhaust off an old one, welded it on to roughly where the old one used to finish and that was that.
It sailed its MOT yesterday both visually and the emissions :D
barny:
i bought a 60+mm 90deg bend from work, cut the rear boc of and clamped said bent on. Its now angled down and to the side and sounds quite cool ! 8)
Disco-Ron:
This is how the tailpipe on my 200tdi exits.... quite unusual, but VERY effective and out of the way for offroading!!! the old pipe ended up facing forwards under the rear axle... hence the slight modification... i still have a rear box, but no centre one...!!
Iain C:
Thanks for the tips guys...I guess if it's illegal then I'll probably just order a new exhaust and have a go myself.
Cheers
Iain
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version