Vehicle & Technical > Defender

Snorkel

(1/3) > >>

Ridgeback:
I want to fit a snorkel to my 90. It does not have the vent in the wing because it was a 2.5N/A. It now has a 200tdi and I want to cut the wing and fit a standard 200 Snorkel.
Does anyone that has a proper 200tdi defender have any photos of how the pipe work goes from the inside of the wing to the air box.

extreme90:
is it a disco 200 ?
ive got my pipe coming in through the heater intake and then straight down to the turbo so i dont have a airbox to worry about if its watertight
dan

CanIBeFrank:
Got the same issue, got hold of a Safari copy, to be honest I miss read the ad thought it said 200Tdi or 2.5 N/A but it was TD.

Going to take a look tonight to see if I can get it to pass through under the heater box etc, I'll update you tomorrow if I can get it sorted.

ps mines a 110 2.5 N/A with a Disco 200Tdi.

zulublue:
Don't bother with the wing type fittings, they will let you down one day, I hydrolocked my engine because of the wing fitting, my fault I know I should have checked it, you can do what dan suggested or get one of these.

http://www.southdown4x4.co.uk/RaisedAirIntake.htm

Mark.

Ridgeback:
I have a disco 200tdi but i have converted it to a defender one

its now got a defender turbo and front timing cover. the air box is still the disco one but i can weld a pipe onto that if i need to.

just not sure about how a standard one goes. the heater box seems in the way

Navigation

[0] Message Index

[#] Next page