Vehicle & Technical > Range Rover

help please

(1/3) > >>

pugstu:
i have just bobtailed my 3.9 efi rangerover (it is only an off roader) i have put the ofiginal tank in the back and the fuel pump is working fine. but the bloody thing wont start is it possible i have cut an important wire! i have spark but for some reason no fuel.

fezzy192:
just a thought have you put your wires on the fuel pump back to front so its running backwards  8)

pugstu:
dont think so because we have pressure coming from the outlet of the pump! keep thinking!! lol

clbarclay:
So the pump is working then, but when you crank the engine there is no smoke out of the exhauast?

It could be a number of things, the injectors might not be firing due to electrical problems, there might be no fuel pressure due to something like the presure regulator failing.

If the pump is working then I'm not sure what wires you could have cut to stop fuel whilst bobtailing the rear. Were you welding with the ECU still wired into the car?

pugstu:
ecu was connected but the battery was off during welding.

Navigation

[0] Message Index

[#] Next page