Vehicle & Technical > Discovery

do these wheels fit on an F reg disco

<< < (2/2)

Niel:

--- Quote from: "nickW" ---it might actually be a G reg its 89

its not for my disco, these came off my 91 disco but these person who's intrested in them wasnts to fit them to a 89 disco and he just wants to know that they will fit

thanks

nick
--- End quote ---


Should fit no problem, designed for 200 series discos the 'Turbine' shape to go with the TDi

Range Rover Blues:
Discos all had the later axles, the only thing they won't fit is 200TDi Defnders and early RRC.  Check the ends of the studs for either a traingle or a "-" stamped into the stud, this denotes the correct hub for alloys and they are all interchangeable and have roughly the same PCD so you don't need a matching spare wheel.

Disco-andy:
the should fit an g reg, but that shap alloy dose NOT fit 24 spline axles. You need 10 spline, with dome headed half shafts. My dad found this out the hard way when he bought a 90 with them on and one fell off, and no it was not just the short studs.

Range Rover Blues:
That's odd, becasue I've had them on my LSE and that's 24 spline.  If anything I would have said the 24 spline had more clearneace at the driveshaft end is much flatter than the old 10 spline halfshaft.  The ones they don't fit are 200 TDi Defender shafts, go on, ask me how I know :roll:

Navigation

[0] Message Index

[*] Previous page