Vehicle & Technical > Series Land Rovers

Chris Perfect or Rocky Mountain

<< < (4/4)

benbenukuk:
i will prob get chris perfect es3000 and stainless steel brake hoses.  Ben

barny:
Are cp one Ti console - or something like that ? If so i've got them on mine with es9000 and 3 leaf rears. Spring have been excellant!  Its a very firm set up but i will be putting the frost crane back in sometime and thats what they recommended for me.

I think i may chane the 9k's down to some 3ks to see if that softens it up a little. Articualtion is fantastic but the ride is very firm!

Little-Green-Machine:
since mines been lifted the standard brake hoses stretch loads when articulating where can i get 2" steel braided ones for a series or are they all the same? thanks reece

benbenukuk:
you can get +2 inch goodrich ones from paddock http://www.paddockspares.com/sp/category/PERFORMANCE/subcategory/Goodridge_Hoses/searchbox2/1__Suitable_for_Series.html
Ben

luffy:

--- Quote from: "Little-Green-Machine" ---since mines been lifted the standard brake hoses stretch loads when articulating where can i get 2" steel braided ones for a series or are they all the same? thanks reece
--- End quote ---


You don't have to use extended hoses - just drop the original ones on a 2" plate, that's all I did.

If you take the fixed pipe-to-flexi hose union out of the bracket that's fixed to the inner wing/chassis (can't remember exactly where it is) and bolt length of plate to the hole in the bracket you can drop the union down by drilling a suitable hole for it at the bottom of the plate.  Make sense?

HTH

Navigation

[0] Message Index

[*] Previous page