Vehicle & Technical > Discovery

Help again with dissy

<< < (3/4) > >>

drmike:
Well I'd get right back to basics and why not take a look at

http://www.roversd1.nl/sd1web/maintenance.html

It might help or get down to Oxfam and get a Haynes manual! Remember the V8 was used in quite a few cars.

Mike

gtomo2:
Thanks thats a good diagram of the firing order. Looking at that my leads are all wrong.  :roll:

drmike:
Well that's some progress then!

Good luck!

Mike

gtomo2:
Leeds were correct timing was 180 deg out :roll:  :oops:  :evil:

gtomo2:
Fired her up and she lives sounds nice and sweet as well plus no smoke out of the back end. so well happy. big thanks to all who helped out with the engine swop and info.

Navigation

[0] Message Index

[#] Next page

[*] Previous page