Vehicle & Technical > Range Rover

RWD Rangie?

(1/3) > >>

RR Paul:
I noticed this morning that i only seem to have RWD. Is there anything obvious that i should look for?
Before you say it, yes I do have a front prop :P
Help!!

Wanderer:
Broken half shaft? Well 2/16th shaft?

Ed

muddyweb:
You need to get the rear wheels turning and get someone to look and see if the front propshaft is turning.  There a a few ways to do this... all are highly dubious from a HSE perspective ;-)

If it is, then as has been suggested it will be a halfshaft or CV joint most likely... if not, it will be your viscous coupling or some other transfer box problem.

DEANO3528:
As you should have the BW transfer box, simply lift a front wheel and try to spin it. If it moves freely suspect the above, but if it moves very very slowly with loads of resistance (you will need a wheel brace) then the viscous coupling is working ok.
What made you think it was rwd only, in the first place?
Bear in mind that your model should have traction control on the rear as well, operated by the abs system.

RR Paul:
basicaly i'm getting too much wheel spin on icy or damp roads!

Navigation

[0] Message Index

[#] Next page