Vehicle & Technical > Series Land Rovers
Wiring
Bob Ajob:
I'm sort of lucky in that this has been done on mine, though unlike your 2a, mine has Series 3 wiring (sort of, goes with the dash), so someone's done it already...
Looking at the diagram I posted before (thanks be to the Series 2 Club), if you zoom in at the top right there's some instructions:
Remove all wires from the voltage regulator
Connect cables A1 & A together, best done at the solenoid
Connect main alternator output to the solenoid
Connect wire from warning lamp to w on the alternator
The Landy Guy:
how far north of warickshire do you live bob?
i owe you a few pints!!
that wiring diagram is alot easier to follow than the one in the haynes manual!!!
The Landy Guy:
is it best with the general wiring to colour code it? or can i just use black and red on it all?
Bob Ajob:
I tend to use what ever is to hand, so long as it's rated correctly for the application. It is of course best to use the correct colours, later on down the line you'll now what's what without following the cables. In reality, you'll probably use what you've got if you intend on keeping it - who's gonna know the difference (apart from us readers) :lol:
I live by J3 of the M6... (removed the rest)
Drop by anytime... I'll be at Langley Farm 7th - 9th September if you're about, long way for you though, must be, it's 110 ish miles for me. :)
The Landy Guy:
yeah well if i am round that way
yeah i live bit further north from you, wolvohampton-telford way
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version