Vehicle & Technical > Discovery

Leaky 200tdi injector....

(1/3) > >>

Disco-Ron:
As above.... are they easy to remove and reseal?? it's not the fuel feed pipe, or the return, but appears to be coming seemingly from the body of the injector...???

All ideas appreciated.... i've not had a really good look at it yet!

AbyssDJ:
could be the sealing washer maybe... take it out, put a new one in and refit the injector

birdy:
sounds like the seal has gone on the injector body

Jimbrown:
The injectors are a doddle to remove just undo the pipe from the top then remove the nut from the securing plate, it does sound like it will be the sealing washer on the bottom.

Pete:
If it's the washer at the bottom of the injector, you should be able to feel it blowing up past the injector.
 Washer about 2p time ten minutes.
 However, if there is diesel escapeing, it's more probable to be a fault with the injector its self.
 Change the washer, if that doesn't cure it, get the injector tested.
 Pete.

Navigation

[0] Message Index

[#] Next page

Go to full version