Vehicle & Technical > Discovery

disco truck.

<< < (70/88) > >>

boss:
don't want to trayback it for the same reason i didn't want an auto....i don't do fashion :lol: the boggers will need around a 4" lift with alot of arch chopping or a 5" with a bit more than i got......i think....that's what the tape measure tells me but i have never actually stood next to 38" tyres.....maby tomorrow will sway me towards 35s :lol: i am beginning to sway to the simex anyway, there just that little bit cheaper, but boggers are just bad :grin:

i am not sure on the winch tray. it may be to low your right but from the dimensions i have got the 8274 wouldn't fit if i made it higher. the chances are that that tray will be going in the back anyways so it matters not.

and as for the blue disco being a "mess" i dissagree, it has caricature and its put to work and by the look of it it works whoops well! besides, you haven't seen mine in full view yet :lol: now that's a mess!

anyway. been playing with the Egr today. made a blanking plate for the manifold out of the old pipe. don't know if it will work, i just filled it in with weld then grinded it all off. worth a try i thought.

ALSO managed to stick on an extra 33.92HP with the trusty k&n sticker would have had more but i don't have any ITG or GREEN stickers :lol:
i have plenty more stickers(pictured below) that have a 100% absolute rude guaranteed power increase., also the green ones willnot make you amazing off road. there FREE! come see me at billing for your free performance sticker. i will be the badly shaved youth with the beard and most probably wearing a hat.....possibility i will be wearing something saying "send more paramedics"...or something about zombies. spot me a mile off!  :lol:
no seriously i have free stickers for you that will get you involved in the un power movement on the internet




made in France urghhh!


bitchin! but will it work????


ahhhh yeahh


powertrip movement stickers free for you all! :lol:


boss:
unfortunately chaps i am looking at moving to saffron Walden, i have an apprenticeship lined up there in hydraulic engineering(well not there but the sourounding area) and the chances are that the truck isn't coming with me, i am going to be re assembling the front again and put the tray on the back where it was originally going. just not going to have the time to work on it like i did so playing silly b*ggers with the front wont be happening for a while:(.
not selling it though. it now has a much shorter list of things to do and it will be out on the mud alot sooner!
also got to clean up the garage a little so if you have seen anything come off of the disco that you want i will trade you for it.
wont be much some things i will trade for a bottel of Dr pepper!


i got:
rear door in its entirety
rear seats
4 springs
rear bumper
heater
air box
300TDI defender air filter(!!!!!brand new!!!!!)
the rear hoop(no doubt jay will snatch that up!)
disco fuel tank
centre console(bit broken but repareable)(better than the 200 one any way :lol:)
CAT pipe(intact)
a cooler to EGR pipe hose
tow bar
full set of defender NAS lights with mounting "plate"
fair few stickers
scrap(if anyone wants to come bye and weigh it in feel free)
may soon have a set of 4 rough country dampers (+5")
and a set of +2" OME springs....i grantee nothing!
an un seized EGR valve
glass for 3 door disco (front doors back)
pollybush kit (minus the hockeystick bushes)

also got the original dampers and damper turrets but I'm not sure if there any good.

again if you have seen in the pics anything that you not so much need but think you may find is usefull give me a shout because it will only get thrown away!
if any of you guys can make use of it you are more than welcome!

thanks
Boss

Eeyore:
Interesting thread, but watch the naughty words please  ;)

boss:
sorry about that :(

mentalmoshio sophs V8i:
boss naughty boy , oh graham bell im as bad at times  :oops:

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version